I love working models like windmills so designed this for easy printing and assembly.

This 3D printed garden windmill spins in the lightest of breezes.

Easy to assemble with click together parts. The windmill comes with both a base and a clamp, so you can choose which one to use.

No supports required for printing.

Printing of the propeller is made easy with small built in 'brims' to anchor it firmly to the print bed. These are easy to trim off after printing.

There's 2 options to hold the windmill, either use the base or one the clamp that allow you to clamp it to the edge of a desk or railing. The clamp has 5cm jaw size (2 inches). The separate pole comes in 2 sizes (20.5cm & 16cm) and slots into the top of the clamp.

The base has a hollow base to fill with water, sand or salt. This stops it blowing over in the wind.

Included with the download files are instructions for printing and assembly.

The windmill dimensions are 10 inches high 9 inches long (25cm high 22cm long).

The windmill STL files are available for purchase on Cults3D at https://cults3d.com/en/3d-model/home/windmill-easy-assembly-click-together-parts